Share to - WeChat
x
Basic Knowledge

Contact Us

  • Tel:
    86-22-58627718(Head Office)
    86-10-87562550(Beijing Office) 
  • Fax:
    86-22-58627711(Head Office)
    86-10-87562567(Beijing Office)
  • Complaints:
    86-22-58627715
    kesu@kelioil.com
Basic Knowledge
The common experiment instrument list of cementing
  • Detailed description

Type

Explanation

The main technical indexes

Main production manufacturer and model number

Slurry mixer

Designed according to the API specification, used for the preparation of cement slurry.

The capacity of slurry cup is 1 litre. Stainless steel. Rotate speed: 150~16000RMD manual operation. 4000RMD low speed, 12000RMD high speed.

EG&G CHANDLER ENGINEERING CO. TU;SA OKLA USA 3060
SHENYANG INSTITUTE OF AERONAUTICAL ENGEERING OIL EQUIPMENT CO. LTD 9360
SHENYANG TAIGE OIL EQUIPMENT CO.LTD 3060

Atmospheric consistometer

Designed according to the API specification, used to stir and eliminate air before testing the fluid loss, rheological property and free fluid. A rough observe of the shape of thickening-time curve, thickening time and the initial consistency.

Operation pressure: normal pressure;  Temperature: 0~93℃;
Rotate speed: 150r/min; Volume of slurry cup: 470cm3;
Power of heater: 1500W.

EG&G CHANDLER ENGINEERING CO. TU;SA OKLA USA 1250
SHENYANG INSTITUTE OF AERONAUTICAL ENGEERING OIL EQUIPMENT CO. LTD 9350
SHENYANG TAIGE OIL EQUIPMENT CO.LTD 1250

High temperature high pressure consistometer

Designed according to the API specification, used to simulate the bottom hole temperature and pressure and determinate the thickening time and the shape of the thickening-time curve to ensure the safe construction time.

The highest temperature: 315℃;the highest pressure: 275MPa
Heater power: 2500w; Rotate speed of slurry cup:150r/min;
Temperature and the pressure with several program automatic control, the maximum heating rate: 3℃/min;consistency scope: 0-100Bc; the external supply compressed air: 1 MPa, 0.2m2/h .

EG&G CHANDLER ENGINEERING CO. TU;SA OKLA USA 8040
SHENYANG INSTITUTE OF AERONAUTICAL ENGEERING OIL EQUIPMENT CO. LTD 9380
SHENYANG TAIGE OIL EQUIPMENT CO.LTD 3080

High temperature high pressure
fluid loss cell

Designed according to the API specification, used to determinate the volume of fluid loss   in 30min under the condition of pressure different 6.9MPa.

Gas source: N2, CO2;
Application temperature: bellow 260℃
Allowable pressure:  <8Mpa.

EG&G CHANDLER ENGINEERING CO. TU;SA OKLA USA 7120
SHENYANG INSTITUTE OF AERONAUTICAL ENGEERING OIL EQUIPMENT CO. LTD 9510
SHENYANG TAIGE OIL EQUIPMENT CO.LTD 9710

Portable consistometer

The portable device designed according to the API specification, used to simulate the bottom hole high temperature and high pressure state, and determinate the thickening time.

Maximum temperature: 177℃; maximum pressure: 110MPa;
Heater power: 2500w;  Rotate speed of slurry cup: 150r/min;
The external supply compressed air: 1 MPa, 0.2m2/h .

EG&G CHANDLER ENGINEERING CO. TU;SA OKLA USA 7720
SHENYANG INSTITUTE OF AERONAUTICAL ENGEERING OIL EQUIPMENT CO. LTD 8716
SHENYANG TAIGE OIL EQUIPMENT CO.LTD 7716

Compressive strength curing device

Designed according to the API specification, used to determinate the compressive pressure under the condition of high temperature and high pressure.

Maximum temperature: 370℃; Maximum pressure: 35Mpa;
Testing block number: 8.

EG&G CHANDLER ENGINEERING CO. TU;SA OKLA USA7370
SHENYANG INSTITUTE OF AERONAUTICAL ENGEERING OIL EQUIPMENT CO. LTD 9390
SHENYANG TAIGE OIL EQUIPMENT CO.LTD 7370

Compressive strength testing device

constant rate of loading according to API specification

Load measure: 0-200KN;  Resolution: 0.1KN;
Measurement accuracy: ±1%, automatic load

WUXI JIANYI EXPERIMENT INSTRUCTION CO. LTD 300B
JINAN PRESS MATHION CO. LTD

Six-speed rotational viscometer

It is designed according to the API specification, used to test the slurry rheological properties, and is suitable for non-newtonian fluid. It is divided into two kinds of manual transmission and eclectic control.  

Rotate speed: 3、6、100、200、300、600r/min;
Sheer stress: 0—153.3Pa;
Measurement range: Newtonian fluid 0—300mPa.s
Non-newtonian fluid 0—150mPa.s

FANN INSTRUMENT COMPANY FAMM35
QIDAO HAITONGDA SPECIAL INSTRUMENTS CO., LTD ZNND6

Atmosphere curing device

Designed according to the API specification, used in the cement block curing.

Maximum temperature: <100℃;Pressure: normal pressure;
Control precision: ±0.1℃;      Heater power: 4500W.

SHENYANG TAIGE OIL EQUIPMENT CO., LTD 1280
SHENYANG INSTITUTE OF AERONAUTICAL ENGEERING OIL EQUIPMENT CO. LTD

Viscometer

Used to test the fluid viscosity.

Measurement range: 10 ~ 2000000mPa.s;
Measurement error:  ±3%; Rotor specification: no.1~4 rotor
Rotor speed: 0.3/0.6/1.5/3/6/12/30/60 r/min

BROOKFEILD ENGINEERING LABORATORIES CO. CBROOKFIELD  LVT

Air compressor

Supply gas for the compressed consistometer and compressed curing kettle.

Pressure: 1.0MPa;  Gas flux: ﹥0.15m3/h.

Piston type air compressor